Q<ra – Canon 540EZ User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
5. Ready Lamp and Test Firing
J
MODE +
— SEL/SET ZOOM
I
MODE
*
— SEUSET ZOOM
Q<ra>
O-S I
r S E
o
(^m
j
1
Turn on the power by setting
the flash unit’s main switch to
the I position.
• The flash unit starts charging.
When fully charged, the ready
lamp lights up
2 After the ready lamp lights,
press the ready lamp (also
used as the test firing button)
to make sure the flash fires.
Test firing is not possible while the camera's metering timer is activated after
pressing the shutter button halfway.
Advertising