Canon 540EZ User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press the Select/Set button.
• The flash output level blinks in
the flash unit's LCD panel.
* •
''Sooi it} mm
M
7 H
______ V
0.50.7 l i s a 3 a ift 0 1310 n
While watching the flash unit’s
LCD panel display, press the
plus button or minus button to
set the desired flash oufput
level amounf.
• Each press of the Plus button
or Minus button increases or
decreases the output level by
fstop.
Press
the
Select/Set
button
again so that the output level
display stops blinking.
• The output level will automati
cally stop blinking if 8 seconds
elapse before the Select/Set
button is pressed.
u
If the flash has been fired 15 times continuously at 1/1 or 1/2 power, allow the
Speedlite to rest for 15 minutes to prevent the flash head from overheating.
Overheating can cause the flash head to breakdown.