Canon P 400 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2 Pull up the supply reel
arm all the way.
t
When projecting Super 8 or Single 8 film, insert the
™ attached reel shaft adapter into the reel shaft match
ing the groove of adapter on the rib. Mount the supply
reel with loaded film onto the reel shaft.
C Bend the clutch lever of the supply reel shaft as shown
in the illustration.
forward
RevN ind
C Lift up the reel holding iever on the take-up reel shaft.
^ Mount the take-up reel onto the reel shaft. In this
case, the reel side which does not have the grooves should
be faced towards you. Then bend the reel holding iever.
7
Insert the plug into the power supply. The cord is ap
proximately two meters (6.5 feet) long.