Carrier Access Access Navigator - Manual (Page 258)

11-10 August 2003 Access Navigator - Release 1.8
Provision Remote Access Bank II
Remote Access Bank II Maintenance Quick Guide
Remote Access Bank II Maintenance Quick Guide
In addition to reading configuration data from the remote Access Bank II, the Access Navigator includes
maintenance commands that can remotely read Access Bank II alarms and event logs, set remote interface
loopbacks, and reset the remote system.
Related Commands Access Bank II
Maintenance Tasks
read remote <n> alarms Remote alarms.
read remote <n> log
clear remote <n> log Remote log events.
read remote <n> equipment Remote equipment list.
read remote <n> loopback Remote loopback status.
send remote <n> loopdown
send remote <n> rs232 line loopup
send remote <n> rs232 tsi loopup
send remote <n> sdsl payload loopup
send remote <n> t1 payload loopup
send remote <n> t1 tsi loopup
send remote <n> t1drop line loopup
send remote <n> t1drop payload loopup
send remote <n> t1drop tsi loopup
send remote <n> v35 line loopup
send remote <n> v35 tsi loopup Remote interface loopbacks.
Note: loopdown command disables
remote loopup.
reset remote <n> Reset remote.