R\r\ remote control shooting – Canon 514XL-S User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
running lock is used in remote control shooting with
a Remote Switch 60 or with the microphone switch.
r\r\
Remote Control Shooting
When the remote switch is used:
Plug the Remote Switch 60 into the remote control
jack. This cuts off the drive circuit, so press the
shutter release lever and rotate the switch to "RL'",
releasing the lever. After this operation, as the
button on the Remote Switch is pressed down,
continuous shooting is performed while it is
being pressed. Sliding the button to the arrow
indication sets the running lock by remote control.
To release the remote control, rotate the main
switch to "R" first, and then unplug the Remote
Switch. If the Remote Switch is unplugged first, the
running lock is still on and the film continues to
run. Don't try to insert or remove the sound
cartridge while the main switch is at the "RL"
position. There is a safety mechanism to prevent
damage to the recording head of film. Film must be
changed after setting the switch to off.
• Finder Cover
Please mount this finder cover before filming
with remote control so that the light will not enter
through the eyepiece and affect the picture image.