Select the date setting, Set the date, Setting the date and time – Canon ZOOM76 User Manual
Page 32: B-34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Date and Time
When you replace the battery or travel abroad, use the
procedure below to set or adjust the date and time
settings.
•Always use the button push projection on the strap
buckle to push the SELECT and SET buttons. (^11)
Setting the Date
Display the date only.
• Press the MODE button to
display the date only.
• Refer to the next page to
set the time
Select the date setting.
• Press the SELECT button to
select the setting
^ The selected setting
(blinking numbers)
changes sequentially from
year to month to day.
Set the date.
• Press the SET button to set
the date.
• Repeat steps 2 and 3 to set
all the date settings.
• If you press the SELECT
button and none of the date
settings blink, date setting
is complete
B-34