H dynamic, N standard], [h on, Hi off – Canon HF S21 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[H Dynamic]*
mode only) Compensates for a higher
degree of oamoorder shake, suoh as when shooting whiie waik-
ing, and is more effeotive as the zoom approaohes fuii wide
angie.
[n Standard], [H On]
Compensates for a iower degree of
oamoorder shake, suoh as when shooting whiie remaining sta
tionary, and is suitabie for shooting naturai-iooking soenes. Use
this setting when reoording movies with the optionai Wide-oon-
verter or Teie-oonverter.
[HI Off]
Use this setting when the oamoorder is mounted on a tri
pod.
Options
(* Default value In mode)
Powered IS
When shooting video, you can use Powered IS to make the image
stabilization even more powerful. Powered IS is most effective when
you are stationary and zooming in on far subjects using high zoom
ratios {the more you approach the telephoto end). Holding the LCD
panel with your left hand will add to the stability of the shot.
Press and hold iPOwtRLOis as long as
you want to activate Powered IS.
• El
appears in yeiiow, whiie
Powered IS is activated.
• You can change the operation of the
POWERED IS! button (long press or
toggle on/off) with the | >■ | #
[POWERED IS Button] setting.
(D
NOTES
If the degree of camcorder shake is too high, the image stabilizer may
not be able to fully compensate.
Powered IS is not available in [03 mode.
For surveying and following shots, when you pan the camcorder from
side to side or tilt it up and down, we recommend setting the IS mode
to [H Dynamic] or [EE Standard],
Video ♦
65