Loading the battery – Canon EOS 620 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
2. Loading the Battery
This camera uses one, six-volt lithium battery pack (2CR5).
1) Remove the grip with a coin or
similar object.
When replacing the battery,
first push the orange lever up
ward to remove the dead bat
tery.
When using a tripod, dismount
the camera before replacing
the battery
2) As shown in the photo, load the
battery so that its terminals
face in the direction of the
camera. Make sure the battery
is pushed in all the way until it
is locked by the orange lever.
3) Replace the grip securely.
Advertising