Canon EOS 620 User Manual
Page 95
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•
While shooting, the “ME” mark will blink
to indicate the camera is in the multiple
exposure status.
•
After the preset number of exposures
have
been
completed,
the
film
automatically advances to the next
frame.
[Clearing Preset Exposures]
1. Before shooting
Follow steps 1) and 2) on p. 52 and turn the
electronic input dial to return the frame
counter to “1".
2. While shooting
The operating procedures are basically the
same as mentioned above, but turn the
electronic input dial until the frame counter
is blank.
[Exposure Compensation]
It is necessary to correct the exposure depen
ding on the situation because the same frame
is exposed several times. Use the exposure
compensation function referring to pp.46—47.