Canon EOS 620 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4) Make sure that the film has no
slack and that its perforations
are properly engaged with the
sprocket teeth.
5) Close the back cover. The
camera
advances
the
film
automatically and stops when
“1” appears in the frame
counter in the display panel
6) During film advance, the film
transport bars will appear at
the bottom of the display panel
moving in sequence from left to
right. However, if the film does
not advance correctly, the bars
blink after the camera has stop
ped and the shutter will not
release. Reload the film
If the film leader extends past
the orange index, take out the
film cartridge and manually re
wind the excess film back Into
the cartridge.
Film becomes soft and
tears easily in high humidity.
Keep it stored in its canister
until loading.
11