Using the built-in flash – Canon AF 35 ML User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Using the Built-in Flash
If the camera-shake warning signal beeps
when you press the shutter button halfway,
use the pop-up flash. If, in this case, you do
not use the flash, the picture most likely will
be underexposed and blurred.
1 Push the flash switch ® in the direction
of the arrow; the built-in flash 0 will pop up.
2. Wait for the flash-ready lamp ® to light
up before you press the shutter button.
Note
If you press the shutter button before the flash-
ready lamp lights up, the picture may be too
dark. Also, do not press the shutter button con-
Advertising