Christie Digital Systems 38-DHD103-XX - Manual (Page 3)

Stacking Frame Installation Instructions
013-100342-01 (Rev.1) (08/06) 3 of 12 pages
1. Stacking Frame Installation
WARNING
ALWAYS power down and unplug the projector prior to servicing.
Wait for the internal cooling fans to stop before unplugging the unit.
WARNING
To avoid possible injury, a minimum of two
people are required to complete this procedure.
1. Turn the projector OFF and disconnect the AC power cord after the cooling fans
have stopped. Allow the projector to cool for at least 45 minutes.
2. Place the projector into the stacking frame so the cut-outs in the bottom mounting
plate of the frame align with the fold mirror and adjustable feet access points on the
projector. Refer to Figure 2.
3. Use a 10mm socket wrench to tighten the six (6) M10 bolts securing the mounting
plate to the bottom of the projector. Refer to Figure 2.
Figure 2. Projector Orientation for Stacking Frame Assembly
OFFICIALLY RELEASED
Document Control
September 8, 2006