Christie Digital Systems 38-DHD103-XX - Manual (Page 7)

Stacking Frame Installation Instructions
013-100342-01 (Rev.1) (08/06) 7 of 12 pages
Hoisting via Stacking Frame Handles
WARNING
When hoisting via the stacking frame handles it is mandatory to use at least
four rigging points (two opposite sides). Straps must be placed on either side
of designated label on the stacking frame handles.
1. If the projector is inverted retract the adjustable feet to prevent the hoisting
hardware from becoming snagged.
WARNING
Always use at least two safety cables when hoisting
and attach them to the two eyebolts on the stacking frame.
2. Attach a safety cable to at least of the eyebolts
mounted on the bottom of the stacking frame.
3. Secure the rigging components to the
appropriate rigging points. Refer to the
designated labels on the stacking frame handles
for rigging positions.
4. It is mandatory to use four rigging points. Ensure
the straps, clamps or cabling meet the adequate
load capacity for the total projector(s) weight.
DO NOT join the rigging straps or cables to a
common point — keep separated.
Refer to Figure 4.
Figure 4. Four Rigging Points
OFFICIALLY RELEASED
Document Control
September 8, 2006