Christie Digital Systems 38-DHD103-XX - Manual (Page 8)

Stacking Frame Installation Instructions
013-100342-01 (Rev.1) (08/06) 8 of 12 pages
H oisting via Roadster/Mirage S+/Roadster HD12K Hardware
WARNING
When hoisting a stack combining Roadster/Mirage S+ and Roadster HD12K
models with any of the models listed in Table 1 use the hardware on the
Roadster/Mirage S+ and Roadster HD12K models to hoist the stack.
WARNING
The four top rigging points have a maximum loading capacity of 800 lbs. each.
When hoisting from the bottom of the projector use at least four of the eight
rigging points (two opposite sets). Use metric hardware only (M12 thread).
Figure 5. Hoisting via Roadster/Mirage S+/Roadster HD12K Hardware
OFFICIALLY RELEASED
Document Control
September 8, 2006