Programmed image control (p.i.c.) – Canon EOS 600 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
PROGRAMMED IMAGE CONTROL (P.I.C.)
Set the main
green mark
switch to the 2)
Hold the shooting mode se
lector down, and turn the elec
tronic input dial
3) A number corresponding to
the PI C photo will appear in
the display panel The number
increases as the dial is turned
Select the desired number
and release the shooting
mode selector
The P.l C number disappears after setting, press the shooting mode selector to recall the number
When using P I C , “P” will blink continuously at all settings from
*
2-7 This is not an indication o1
malfunction, but a reminder that #1, standard is not in use
18
Advertising