Canon EOS 5000 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADVANCED OPERATIONS
1
Turn the command dial and set the
desired shutter speed.
Press the shutter button halfway to
focus the subject.
• The aperture value will be indicated on the
LCD panel.
Check that the AE indicator and the
in-focus lamp in the viewfinder are
lit, then take the photograph.
If the AE indicator in the viewfinder blinks, press the shutter
button halfway and check the aperture value on the LCD panel.
•
If the aperture value on the LCD panel blinks when the
camera is set to the smallest aperture value (i.e. maximum
aperture) of the lens, the scene is too dark. Should this
happen, turn the command dial and lower the shutter speed
until the AE indicator stops blinking. Check that the shutter
speed will not result in a blurred picture due to camera shake.
• If the aperture value on the LCD panel blinks when the
camera is set to the largest aperture value (i.e. minimum
aperture) of the lens, the scene is too bright. Should this
happen, turn the command dial and increase the shutter
speed until the AE indicator stops blinking.
30