Canon EOS 1000 F - Manual (Page 97)

EXPOSURE CONTROL
Light Metering: TTL full-aperture meter­
ing using an SPC (Silicon Photocell).
Three metering patterns available:
3-zone evaluative metering, partial
metering which covers approx. 9.5% of
the central picture area and center-
weighted average metering (only when
selecting the manual exposure mode).
Metering Range: EV 2-20 with 50 mm f/1.4
lens at ISO 100.
Shooting Modes:
1. Green Zone (Intelligent Program AE)
2. Programmed image Control (Portrait,
Landscape, Close-up, Sports)
3. Intelligent Program AE
4. Shutter-priority AE
5. Aperture-priority AE
6. Metered Manual
7. Depth-of-Field AE
8. Flash AE (A-TTL or TTL program flash
AE with the flash)
Camera Shake Warning: Operates in
Green Zone and Programmed Image
Control modes. Shutter speed blinks
when automatically-set shutter speed is
0 to 0.5 steps slower than “1/focal
length of the lens in use.”
Multiple Exposures: Up to nine exposures
can be preset. Automatically clears
upon completion.
Exposure Compensation: + 1 - 2 stops in
1/2-stop increments.
FILM TRANSPORT
Film Speed Setting: Automatically set ac­
cording to DX code (ISC 25-5000) or set
by user (ISC 6-6400).
Film Loading: Automatic prewind system.
After film positioning and back cover
closure, the film automatically winds to
the end of the roll and stops.
59