Canon EOS 650 - Manual (Page 10)

1. Setting the Main Switch to the ^Tuii Auto” Position
1) Slide the lens focus mode 2) Set the camera’s main switch
switch to “AF.”
14
^2. Holding the Camera
to the “Full Auto” position (the
green “ a ” mark).
The following displays will
appear:
ONE SHOT: One of the AF
modes.
P (Program): One of the AE
modes.
S (Single): One of the film
winding modes.
For further details on the
above displays, please refer
to pp. 24, 26 and 27.
I
Your pictures will not be sharp if the camera
moves as the shutter Is pressed. This movement
is called “camera-shake.” To avoid this, try the
following comera-holding technique:
1) Hold the camera firmly, with your left hand sup­
porting the camera and lens.
2) Press your left elbow close to your body.
3) Lightly hold the camera against your cheek or
forehead and look into the viewfinder.
4) Spread your feet slightly apart, one foot ahead
of the other, and relax.
There is no one correct way to hold the
camera, so experiment to find the most
comfortable way. If possible, lean against a
steady support such as a tree, wall, or table
to help you keep the camera still.
15