Canon EOS 650 - Manual (Page 40)

4. Lithium Battery Pack (2)
Even if one blinking bar mark or no bar mark ap­
pears in the display panel during battery check, ex­
posure will be correct as long as the shutter
releases. Automatic wind and rewind, however,
may not be possible because of Insufficient bat­
tery power.
Also, if the camera stops during wind or rewind all
the film transport bars start blinking to warn you.
Automatic rewind re-starts after new battery pack
replacement and pressing the film rewind but­
ton.
5. X-ray Examinations at Airports
Film passing through X-ray examinations at air­
ports may be exposed and ruined even when load­
ed. To avoid accidental exposure, tell the inspec­
tor to hand-check your camera and film.
Appendix
74
1. LCD Panel Display
This camera uses a liquid crystal display panel to
indicate shooting information. The diagram below
shows all the Information for explanation. How­
ever, the display never actually looks like this.
Normally, the panel displays only the information
required at the time.
EOS 650
©-
r
4-c
L$i
.©
P Tv A\ DEPTH
ONE SHOT
-SERVO
.M.FOCUS
- ©
■ j—@ -n
'1----@-|-®
-----®—I
0 Battery check
0 Depth of field AE
0 ISO film speed
0 Shutter speed
0 Metered manual exposure level
©Program AE
©Manual
0 ISO indicator
0 AF mode
— @
0 One-shot AF
©Servo AF
©Manual focusing
©Aperture value
© Exposure compensation value
©Shutter-priority AE
©Aperture-priority AE
© Depth of field AE
© Exposure compensation
-a
-a-
© Self-timer
© Film-load check
© Film rewind completion
© Film transport (wind/rewind)
© Film wind completion
©Battery check
©Auto exposure bracketing value
©Auto exposure bracketing
© Multiple exposures
©Number of multiple exposures
75