Cano – Canon Model 7 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.
Wind
5-1/4
feet
of
film
around
the
center
spool
moderately
tight
for
36
exposures
...
3-1/4
feet
for
20
exposures
...
3
feet
for
18
exposures.
Do
not touch the emulsion (dull) side with your fingers.
4.
To
assemble
the
magazine,
first
insert
the
center
spool
into
the
inner
shell,
with the beginning of the film sticking out of the slot.
5. Place the center spool into the inner shell and then place it into the outer shell.
Inner
and
outer
shell
slots
should
be
superimposed.
Turn
the
inner
shell
counter-
clokwise until it clicks into the locked position.
6.
When
the
film
magazine
is
properly
loaded
and
locked,
draw
out
the
film
and
trim it, as illustrated.
• This procedure must be done in a dark room or under safe lighting conditions.
• Keep the magazine in its case when loaded.
• Keep the magazine clean always.
Cano^^
33