Canon Super 8 814 - Manual (Page 45)

APERTURE ADJUSTING MECHANISM
By turning the aperture control ring the following
functions can be performed :
1. In EE operation, the maximum aperture open­
ing can be controlled and the aperture can be
closed completely.
2. In manual operation, the aperture can be con-
troiled and closed completely.
By utilizing these functions, special effects such
as fading, high-key or low-key can be incorporated
into your movie making.
In EE Operation "AUTO"
In Manual Operation "MANUAL"
EE operation at “O” position.
S
C Control the aperture opening
Q by turning towards “C” side.
C Aperture is completely closed
when fully turned to “C" side.
y
Full aperture opening at “O”
Q position.
^
Manually set by turning
—I Q towards "C” side.
t]
C Aperture is completely closed
when fully turned to “C” side.
EE functions in the entire range of
aperture stop.
EE functions only at a smaller aper­
ture opening than the aperture stop
Indicated by the needle.
The needle points to "C" (the red
mark on the left side).
The needle points to the red mark
on the right side
The needle indicates the aperture
stop.
/ J
The needle points to “C" (the red 29
mark on the left side).