The water inlet filter, Aintenance – LG F84882WH User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
aintenance
^ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical
shock to avoid electrical shock hazards.
0
When disposing of the appiiance, cut off the mains cable, and destroy the plug Disable
the door lock to prevent young children being trapped inside.
■ The water inlet filter
-"
l£
" error message will blink on the control panel when water does not enter the
detergent drawer.
- If water is very hard or contains traces of lime deposit, the water inlet filter may
become clogged.
It is therefore a good idea to clean it from time to time.
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3.
Clean the filter using a hard bristle
brush.
4.
Tighten up the inlet hose.
23