To store a custom program, To recall your stored custom program, Clean the door and its opening – LG ELECTRIC AND GAS DRYER D 5988W User Manual
Page 28: Opérating you r dryer, Custom programming 12. beeper, Maintenance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPÉRATING YOU R DRYER
11. Custom Programming
12. Beeper
o
cus
■OPTION-
Set up your favorite combination
of settings and save them here
for one-touch recall.
To store a CUSTOM
PROGRAM.
---------------------
1. Select a cycle
2. Change DRY LEVEL and TEMP. CONTROL.
3. Select OPTIONS you want.
4. Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM button, then press
START/PAUSE.
The BEEPER controls the
volume of the beep that is made
when you press any of the
buttons on the control panel and
the termination of any cycle is
indicated.
Press BEEPER to adjust the
sound level or turn off the signal.
HIGH
t
) LOW
■ 1
■OFF
BEEPER
■
Maintenance
Clean lint filler
\
Clean the iini filler after eat h use and check it
before use. Not cleaning or emptying the filter
will increase drying time and energy..........
consumption, therefore dryer life expectancy
could be shortened after all.
LOpen the door
and pull the filter
straight up
2.Clean the filter using one of following ways in cases.
■ Clean the door and its opening
1. Wipe out the
door opening.
Otherwises,
build-ups of dirts
and foreign
objects will
damage sealing
of door.
2. Clean the
transparent glass
door to keep
inside view clear
througth the
glass.
¡3) Vaccum the lint
filter
® Wash the lint
screen in
warm, soapy
water.
Dry thoroughly
and replace.
2 8