Roubleshooting guide, Symptom possible cause solution – LG WD-65130F User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

roubleshooting guide

Symptom

Possible Cause

Solution

Rnse+

; Crease Care

• Water supply is not adequate in area

• Water supply taps are not completely

open,

• Water inlet hose(s) are kinked,

• The filter of the inlet hose(s) are clogged.

Check another tap in the house.

Fully open tap.

Straighten hose(s).

Check the filter of the inlet hose.

R-eWash

; Time Save

• Drain hose is kinked or clogged.

• The drain filter is clogged.

Clean and straighten the drain hose.

Glean the drain filter.

1000 (800) (650)

•;':;-S00 (600) (500)

-,:--l00 (400) (400)

No Spin

; R nse Hold

• Load is too small.

• Load is out of balance

• The appliance has an imbalance

detection and correction system. If

individual heavy articles are loaded

(ex. bath mat. both robe, etc.) this system

may stop spinning or even interrupt the

spin cycle altogether.

• If the laundry is still too wet at the end of

the cycle, add smaller articles of laundry

to balance the load and repeat the spin

cycle,

Add 1 or 2 similar items to help

balance the load.

Rearrange load to allow proper

spinning

-95'GF>eWFi#i v-Rnse»

--frilO ■: icTime Sev® -;.-0'9iise Cere

-;-irSO

■:-Qdd

'Is the door

1 opened?

Close the door.

^ If "door error' is not released, call for

service.

-::-9i’C -
->60

:;-40 ■

toW

Unplug the power plug and call for

service.

\-^eWadT

-;-fir№f

• Water overfills due to the faulty water

valve,

Close the water tap.

Unplug the power plug.

Ca l for service.

-■;--95'C Wash
::-so

;-Tlme Ssve

• Water level sensor has malfunctioned.

-::-1000 -.:.-95'C

:

;

300

69

v j o o

-.:.-NflSWo

- i - i u

• Over load in motor.

2S

Advertising
This manual is related to the following products: