Installation place requirement, Power outlet, Bs plug safety details (for u.k. user) – LG WD-65130F User Manual
Page 6: Nstallation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
nstallation
Installation place requirement
Level floor:
Allowable slope under entire washer is 1 ’
Power outlet:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
than one appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm: rear/2cm:right & left side)
Do not place or store laundry products on top of
washer at any times.
They can damage the finish or controls.
BS Plug Safety Details (For U.K. User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE;
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: UVE
This appliance must be earthed
ahd Ifetw^ilh^ -
As the colours of the wires in the rnains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter
E
or by the earth symbol (^) or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.