Transit bolts, Removing transit bolts, Nstallation – LG WD-65130F User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
nstallation
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting w hen the washing machine is installed on a
carpeted floor.
■ Transit bolts
The appliance is fitted with transit boils to prevent internal damage during transport.
■ Removing transit bolts
1. To prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts along with the rubber bungs.
♦ If they are not removed, it may cause heavy
vibration, noise and malfunction.
3. Take out the 4 bolts along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolls and the spanner for future use.
• Whenever the appliance is transported, the
transit bolts must be refitted.
2 . Unscrew the 4 bolls with
the spanner supplied.
4. Close the holes with the caps supplied.