Carrier Packaged Terminal s & Heat Pumps 52P - Manual (Page 18)

18
OUTDOOR GRILLES
Carrier recommends only the use of Carrier-supplied
grilles for use on the 52P and 52C series units. How-
ever, the architectural designs of a building may dic-
tate the use of special or oversized grilles and/or
louvers. Special louvers or any special architectural
treatment of the building façade that may restrict free
circulation of condenser airflow should be referred to
Carrier Corporation for evaluation and approval.
Aluminum Architectural
Outdoor Grilles (Louvered)
Part No.: GRILLE-ALU-CLEAR (anodized aluminum)
Part No.: GRILLE-ALU-WHITE
Part No.: GRILLE-ALU-BEIGE
Part No.: GRILLE-ALU-ALPIN (color matches
Carrier wall sleeve)
Part No.: GRILLE-ALU-BRONZ
Part No.: GRILLE-ALU-MBRNZ
Part No.: GRILLE-ALU-BROWN
Part No.: GRILLE-ALU-LGREY
Part No.: GRILLE-ALU-SGREY
Part No.: GRILLE-ALU-PEACH
Part No.: GRILLE-ALU-MELON
Part No.: GRILLE-ALU-RDBRK
Part No.: GRILLE-ALU-BLUE
Part No.: GRILLE-ALU-GREEN
This premium line of decorative outdoor grilles will
enhance the appearance of any building. The grilles
are made of strong, durable, extruded, anodized alumi-
num and are designed to be mounted easily from
inside the room. These elegant grilles, available in
many standard colors, have baked enamel finishes
containing 50% Kynar® resin, for a superior finish
that will withstand the most extreme conditions. See
inside of back cover for standard colors and color sam-
ples. For more information on custom colors and sizes,
contact Reliable Products at 1-800-239-4621.
Standard Outdoor Aluminum
Grille
Part No.: GRILLE-ALU-STAMP
This cost-effective, one-piece standard grille is made
from durable anodized aluminum. The grille is light-
weight, has a clear finish, and is easy to install from
inside the room.
Polymeric Architectural Outdoor
Grilles (Louvered)
Part No.: GRILLE-PLA-BROWN
Part No.: GRILLE-PLA-BEIGE
Part No.: GRILLE-PLA-ALPIN (color matches
Carrier wall sleeve)
This value line of polymeric architectural outdoor
grilles will blend attractively with most building exte-
riors. Mounted easily from inside the room, the one-
piece, molded grille is designed for protection,
enhanced appearance, and superior weather-resistance.
The grille is made of durable polymer and has a color-
fast, lightly textured finish that blends well with most
exterior finishes.
FIELD-INSTALLED ACCESSORIES
(52P AND 52C) (cont)
Architectural Grille in
Aluminum or Polymeric
Standard Grille