C op y – Canon 500 HS User Manual

Page 194

Advertising
background image

Troubleshooting

195

is displayed when the shutter button is pressed halfway (p. 56).

•

Set [IS mode] to [Continuous] (p. 123).

•

Set the flash mode to

h (p. 121).

•

Increase the ISO speed (p. 106).

•

Mount the camera on a tripod or take other measures to keep it still. In this case, set [IS
Mode] to [Off] (p. 123).

Shots are out of focus.

•

Press the shutter button halfway to focus on subjects before pressing it all the way down
to shoot (p. 37).

•

Make sure subjects are within focusing range (see “Specifications” in the Getting
Started
guide).

•

Set [AF-assist Beam] to [On] (p. 77).

•

Confirm that unneeded functions such as macro are deactivated.

•

Try shooting with focus lock or AF lock (pp. 118, 120).

No AF frames are displayed and the camera does not focus when the shutter
button is pressed halfway.

•

To have AF frames displayed and the camera focus correctly, try composing the shot
with higher-contrast subject areas centered before you press the shutter button
halfway. Otherwise, try pressing the shutter button halfway repeatedly.

Subjects in shots look too dark.

•

Set the flash mode to

h (p. 121).

•

Adjust brightness by using exposure compensation (p. 105).

•

Adjust contrast by using i-Contrast (pp. 107, 155).

•

Use spot metering or AE lock (pp. 105, 106).

Subjects look too bright, highlights are washed-out.

•

Set the flash mode to

! (p. 56).

•

Adjust brightness by using exposure compensation (p. 105).

•

Use spot metering or AE lock (pp. 105, 106).

•

Reduce the lighting on subjects.

Shots look too dark despite the flash firing (p. 47).

•

Shoot within flash range (see “Specifications” in the Getting Started guide).

•

Increase the ISO speed (p. 106).

Subjects in flash shots look too bright, highlights are washed-out.

•

Shoot within flash range (see “Specifications” in the Getting Started guide).

•

Set the flash mode to

! (p. 56).

White dots or similar image artifacts appear in flash shots.

•

This is caused by light from the flash reflecting off dust or airborne particles.

Shots look grainy.

•

Lower the ISO speed (p. 106).

•

High ISO speeds in some shooting modes may cause grainy images (p. 82).

COP

Y

Advertising