AVer E1008H User Manual
Page 102
93
7. In Camera section, select and click on the camera number in Motion and Video Loss to
set the condition for the system to alarm.
-
Motion: select and click on the camera number (01 to 08) to set the condition for the
system to alarm. Click the Setting button to setup the system to send out the alarm
when motion is detected and last the time that user has entered in Continuous trigger
duration. The time range is 0~ 300 seconds.
-
Video Loss: click the camera number (01 to 08) to set the alarm condition when video
is lost. Click the Setting button to setup the system to send out the alarm when video is
lost and status last the time that user has entered in Continuous trigger duration.
The time range is 0~ 300 seconds.
-
IVA: click the camera number (01 to 08) to set the alarm condition when IVA functions
are triggered. Click the Setting button to setup the system to send out the alarm when
IVA functions have triggered and status last the time that user has entered in
Continuous trigger duration. The time range is 0~ 300 seconds.