1 connect the analog camera, Connect the analog camera – AVer E1008H User Manual
Page 63
Advertising
54
2.8.1
Connect the Analog Camera
Analog camera only supports on E1008H model.
1. Connect the DVI cable to the video in port of NVR/DVR.
2. Connect the analog camera to the DVI cable of NVR/DVR and power on the analog
camera.
3. In Camera List, select the channel that connect with Analog camera and select Type of
camera as Analog.
4. Next, click Apply to make the connection. After connection is successful, user should see
the live video of analog camera.
5. To setup detail of analog camera, refer to
Advertising
This manual is related to the following products: