AVer E1008H User Manual
Page 113
Advertising
104
-
PTZ preset point
Position the PTZ camera based on the preset point setting. Beside the PTZ preset
point check box, click Detail. In the Trigger PTZ Preset Setting dialog box, select the
PTZ camera number then select the Enable check box. Select the position of the PTZ
camera when the alarm is activated and ended. For the PTZ camera end point, user
can also select on preset position or Auto Pan between preset position groups.
7. After setup all alarm actions, click Apply to save the settings.
8. To modify the alarm condition setting, click Setting button of Alarm # that user has created.
Remember to click Apply to save the changes after modification.
Advertising
This manual is related to the following products: