2 relay setting – AVer E1008H User Manual
Page 119
Advertising
110
2.14.2
Relay Setting
1. Click Setup tab > Alarm Setting > Relay tab.
2. Click the drop-down list and select the Relay #.
3. Enter relay name in Name column.
4. The system automatically detects the card and input number. In the Content section, user
can enter a short description of relay in Description column.
5. In the test section, click Test to trigger relay. Red is high and Green is low.
6. Click Apply to save the setting. To exit without saving the setting, click Cancel button.
Advertising
This manual is related to the following products: