B&M 120001 SHIFT PLUS 2 TRANS CONTROLLER User Manual
Page 7
Live Data:
The Live Data feature allows the monitoring of various engine and transmission parameters in real time. There are
two screens that can be selected using the UP and DOWN arrows. To return to the main menu, press the POWER/
MENU button.
In addition to live data readings, the Live Data screens also feature several Status Indicators. They show when
certain conditions are met. In the picture below-on the left, the TC indicator is “off”. The PM and MM indicators are
“on”. These indicators can serve as a troubleshooting tool by offering a way to verify that the various switched inputs
are wired and functioning properly.
DASH 1
RPM
Engine speed
MPH
Vehicle speed
GEAR Current gear
Status Indicator
Meaning
TC
PM
MM
Torque Converter Clutch. This indicates that the torque converter clutch
is locked. It is normally controlled automatically by the TCU but can
also be forced to lock by grounding the TCC APPLY wire.
Performance Mode. This indicates that the ECONOMY / PERFOR-
MANCE wire has been grounded to select the more aggressive Perfor-
mance Mode. When this indicator is off, the TCU operates in normal
Economy Mode.
Manual Mode. This indicates that manual bump up
bump down shifting has been enabled by grounding the
Auto/Manual wire in the MANUAL SHIFT connector.
The TCU will hold the current gear until told to shift,
unless the vehicle comes to a stop. In that case, it will
downshift into 1st gear.
Enter/ Back
Scroll Up
Scroll Down
7