B&M 45070 PRO RIPPER SHIFTER - MUST W/T5 & T45 - Manual (Page 5)

STEP 11. Thread jam nuts onto shift stops.
Parts: Shift stop jam nuts (2)
STEP 12. If a stiffer side-to-side action is desired, follow the next
three steps.
Remove socket locks from shift stop ring.
Tools: 5/16" Allen wrench
STEP 13. Replace softer springs with supplied stiffer springs.
Parts: Stiff springs (2)
STEP 14. Reinstall socket locks in shift stop ring.
NOTE: Make sure two (2) threads are exposed from shift
stop ring to socket lock.
If socket lock is down too far, transmission may
not engaged.
Tools: 5/16" Allen wrench