B&M 45070 PRO RIPPER SHIFTER - MUST W/T5 & T45 - Manual (Page 8)

STEP 26. Reconnect cigarette lighter wire harness.
STEP 25. Install threaded knob adapter.
NOTE: If adapter is installed as seen in picture, knob
will be closer to driver
Parts: Threaded Adapter, Button-head Screws (2) &
thread adhesive.
Tools: 3/16" Allen wrench
NOTE: FAILURE TO USE THREAD ADHESIVE
COULD RESULT IN SHIFTER MALFUNCTION.
STEP 24. Install upper stick in position decided in steps 19 and
20 using thread adhesive.
Parts: Upper Stick, Button-head Screws(2) &
thread adhesive
Tools: 3/16" Allen wrench
NOTE: FAILURE TO USE THREAD ADHESIVE
COULD RESULT IN SHIFTER MALFUNCTION.
STEP 23. Decide how short you want the lever. Bottom two holes
will provide a lower stick and shorter throws.
High Stick,
Longer Throw
Lower Stick,
Shorter Throw