B&M 45070 PRO RIPPER SHIFTER - MUST W/T5 & T45 User Manual
Page 7
Advertising
STEP 20. Install protective rubber boot.
STEP 21. Install four (4) bolts securing protective boot.
Tools: Drive, extension, and 8mm socket
STEP 22. Decide placement of knob.
Knob angled
forward, closer
to dash
Knob angled
back, further from
dash
STEP 19. Adjust shift stops accordingly.
Note: Make sure all gears are fully engaged
Tools: 3/4" open-ended wrench, 1/4" allen wrench
Advertising