Salter Brecknell 750 Series - Manual (Page 23)

Page C-1
CHAPTER 5: USER MENU DESCRIPTIONS AND PROCEDURES
5.1 USER MENU DESCRIPTIONS
This section provides more detailed descriptions of the selections found in the User Menu Chart.
Factory-set defaults are shown in bold with a checkmark (
√).
NAME/CODE DESCRIPTION CODE/VALUE
A1
Baud Rate Selects the baud rate for data transmission through both serial ports
(COM1 and COM2). 1200 2400 √
4800 9600
A2
Data Bits and
Parity Selects the number of data bits and parity of serial transmission.
"8n" = 8 data bits with no parity bit and one stop bit
"7O" = 7 data bits with odd parity bit and one stop bit
"7E" = 7 data bits with even parity bit and one stop bit
"7n" = 7 data bits with no parity bit and two stop bits
8n √
7O
7E
7n
A3
COM1 Mode Selects the mode of the COM1 serial port: Refer to Appendix B for
more information.
"0" = Full Duplex Mode
"1" = Print Ticket Mode
0 √
1
A4
ID No. Enable Allows the ID number to be disabled in the Print Ticket mode. Valid
only when A3 is set to “1”.
"0" = Disable the ID No. "1" = Enable the ID No. 0 √
1
A5
ID No. Entry Actuates the function that allows entry of a new ID No. Valid only
when A3 is set to “1”. Pressing the ZERO key to scroll down one level
begins the sequence. 0 - 199999 (S750-
8)
0 - 999999 (S750)
123456
√
A6
No. of Line
Feeds Actuates the function that allows entry of the desired number of line
feeds to be printed in Print Ticket Mode. Valid only when A3 is set to
“1”. Pressing the ZERO key to scroll down one level begins the
sequence. 0 - 99
5
√
A7
Handshaking
Enable Enables hardware handshaking for Print Ticket Mode. Valid only
when A3 is set to “1”.
"0" = Disable Handshaking "1" = Enable Handshaking 0 √
1
A8
Time Enable Allows the time to be disabled in the Print Ticket mode. Valid only
when A3 is set to “1”.
"0" = Disable the time printout "1" = Enable the time printout 0 √
1
A9
Time Format Selects the printed format for current time. Valid only when A3 is set
to “1” and indicator contains Time and Date option.
"0" = AM/PM "1" = 24 Hr 0 √
1
A10
Time Entry Actuates the function that allows entry of the current time. Valid only
for indicators containing the Time and Date option. Pressing the
ZERO key to scroll down one level begins the test sequence. Press ZERO key
to begin sequence
A11
Date Enable Allows the date to be disabled in the Print Ticket mode. Valid only
when A3 is set to “1”.
"0" = Disable the date printout "1" = Enable the date printout 0 √
1