Salter Brecknell 750 Series - Manual (Page 24)

Page C-1
NAME/CODE DESCRIPTION CODE/VALUE
A12
Date Format Selects the printed format for current date. Valid only when A3 is set
to “1” and indicator contains Time and Date option.
"0" = mm/dd/yy "1" = dd/mm/yy 0 √
1
A13
Date Entry Actuates the function that allows entry of the current date. Valid only
for indicators containing the Time and Date option. Pressing the
ZERO key to scroll down one level begins the test sequence. Press ZERO key
to begin sequence
A14
Display Check Actuates the function that illuminates all digit segments, decimal
points, and LCD annunciators in a test sequence. Pressing the ZERO
key to scroll down one level begins the test sequence. Press ZERO key
to begin sequence
5.2 USER MENU PROCEDURES
This section provides instructions for all of the User Menu procedures.
5.2.1 ID Number Entry (A5)
1. While in the User Menu mode, scroll to "A 5", then scroll down once using the
ZERO key to enter the ID Number menu.
8. The display will momentarily show "ID NO", followed by a value with one flashing
digit. This value will be the current ID number value.
9. Use the four directional keys (shown in Figure 5-1 below) to adjust the displayed
value to the actual ID Number value. Increase the flashing digit by pressing the
UNITS key. Decrease the flashing digit by pressing the ZERO key. Pressing the
PRINT key or the TARE key will change the position of the flashing digit.
USER MODE KEY FUNCTIONS
ZERO
GROSS
NET
TARE PRINT
SET
UNITS
Figure 5-1: User Menu Key Assignments
10. After setting the exact value, press the NET/GROSS key to save the ID Number
value. The display will show "SET" momentarily, then revert back up to A5.