CASO Germany FastVac 4000 - Manual (Page 38)

caso FastVac 4000 38
15 Complete Overview
This chapter provides you with an overview of your vacuum sealer and explains some of
its key features.
15.1 Appliance diagram
11. Front handle: Press down to lock the cover. And lift to open the cover.
12. Air intake: Air intake connects with vacuum chamber and pump. Do not cover this air
intake when placing bag for Vacuum&Seal operations.
13. Vacuum chamber: Position the open end of the bag inside the chamber.
14. Sealing profile Place the bag to be sealed over this profile.
15. Lower gasket
16. Sealing bar: Contains a heating wire covered with Teflon which allows the bag to
seal but not to stick to the strip. Place the bag to be sealed over this sealing element.
17. Upper gasket
18. Cutter: Press and slide in one direction or another to cut bags to a desired size.
19. Cutter rack
WARNING
Please observe the following safety notice to reduce the risk of burns.
► Never touch the sealing bar while the unit is operating.