CASO Germany FastVac 4000 - Manual (Page 45)

caso FastVac 4000 45
 Inside of the unit
• Wipe away any food or liquids with a paper towel.
 Cleaning bags for reuse
•
Wash the bags in warm water with a mild dishwashing soap, then rinse them well
and allow them to dry completely before reusing
.
DANGER
► Bags used to store raw meats, fish or greasy foods should never be reused due to risk
of contamination.
18 Troubleshooting
The following table may help you narrow down and address minor malfunctions:
18.1 Safety notices
DANGER
► Only qualified electricians, who have been trained by the manufacturer may carry out
any repairs on electrical equipment.
► Improperly performed repairs may result in personal injury or damage to the device.
18.2 Troubleshooting table
Fault Possible Cause To Rectify
Device does not turn
on Defective power cord Send device to Customer Service
A complete vacuum is
not being created in
the bag.
The open end of the bag is
not completely inside the
vacuum chamber
Position the bag correctly
The bag is defective Select another bag
There is residue on the
welding and the seal Clean the welding / seals and
retry once they are dry
The bag is not being
sealed correctly The sealing bar is
overheating so that the bag
melts Open the cover on the unit and
let it cool down for a few minutes.
Please use only specified bags
and rolls
Carefully follow all the steps in
Chapter “Vacuum with a bag of
the bag roll”. Roll / bag is not positioned
correctly.