BoonDocker POLARIS: 2011-14 PRO RMK 800 - Manual (Page 4)

BoonDocker RMK Turbo
Revised 11/5/2012 Page 4 of 13
www.boondockers.com……………….....
BoonDocker
……….………………....877-522-7805
7. Use a punch to remove the steel center of each
rivet then drill out the factory rivets and remove stock
kick plate
8. Remove the factory exhaust deflector and rubber
exhaust seal.
9. Install the aluminum exhaust hole block off plate
using 3 large head steel rivets,
Note: install rivets
facing down as shown
10. Use attached template to locate muffler hole.
If installing standard internal waste gate muffler drill
2 1/4” hole. If installing
TIAL external waste gate
stainless steel upgraded muffler DRILL 2 1/2” hole.
11.Install spring tab using factory bolt as shown.
12. Using a pair of pliers break off chassis tab in the
image and grind to match the stock contoured sur-
face.