Copernicus AUD6-DCS - Manual (Page 9)

8
Attach Powerbar to Powerbar Holder
You will need:
(Not to Scale)
Actual Size:
Remove backing on double-sided tape and press your powerbar onto bracket face to adhere to Powerbar
Holder.
Wrap Powerbar Cord around
hooks provided on bottom of
Powerbar Holder. !
10
1. Use the iPad mini™ spacer, and set the bottom lip to its minimum position.
Using Dewey with iPad mini™
2. Then slide green piece out to secure iPad Mini™.
Slide the spacer into
the provided slot
Loosen the knob to
slide the bottom lip
into position and then
tighten
1. 2. 3.
1. There is no need for the iPad mini™ spacer, set up the bottom lip to its maximum position.
Using Dewey with 10” iPad®
2. Then slide green piece out to secure iPad®.
1. 2. 3.
Store the spacer under
Dewey’s top mechanism.
Note: To reposition the spacer,
push up, then slide out.
Loosen the knob to
slide the bottom lip
out and then tighten
AUD5-DCS_AUD6-DCS - Version A - 17 December 2014 - Copernicus Educational Products Inc.