Copernicus IR400 - Manual (Page 32)

Epson_CART - Version 2012_A - May 8 2012 - Copernicus Educational Products Inc.
20.1
Install Projector Arm Adapter Plate
1
Remove four screws and washers. Keep for later step.
32
You will need:
(not to scale)
Adapter Plate x 1 Epson Projector Arm x 1
2
Slide on the Projector Arm Adapter Plate. Line up slots on the arm with plate.
Make sure hexagonal screw is in place.
Hold the two
mount
pieces
together
so that the
slots in
each align.