Copernicus IR400 - Manual (Page 33)

Epson_CART - Version 2012_A - May 8 2012 - Copernicus Educational Products Inc.
20.2
Actual Size:
M8 flat washer
4x
U
M4 x 16mm bolt
6x
DD
M4 lock washer
6x 9/16” x 11/64” flat
washer 6x
EE FF
3 While holding the two mount pieces together and holding in place the hexagonal shaft,
install the four screws you kept, along with the added washer. Do not fully tighten.
D
4
Install six short screws, lock washers and flat washers. Do not tighten the 6 screws
all the way until after you mount the arm on the Projector Support Arm that was included
with your Cart or Wall Mount.
A
B
C
33