Copernicus IR400 - Manual (Page 48)

Epson_CART - Version 2012_A - May 8 2012 - Copernicus Educational Products Inc.
Routing Cables Through the Cart
You will need:
(not to scale)
Black one-wrap
Velcro® strap
12x Split black
wire loom
1x
VGA cable & power projector cord run through the
projector setting plate. Plug both cords into the side of the
projector - VGA cord plugs into ‘Computer 1’ source.
At the back of the projector setting plate, feed the two cables through
the hole. Hold the cables together and wrap the split black wire loom
around the cables, containing the length of them within the loom.
Following the diagram below, route the loom appropriately.
Secure in multiple locations with Velcro® straps.
V
PP
VGA cable
Projector power cable (provided with projector)
(provided with projector )
Lift board to highest position
before securing any Velcro® straps
Wiring through the
optional Lock Box:
! PP
V
V
PP
48