Copernicus IR400 - Manual (Page 34)

Epson_CART - Version 2012_A - May 8 2012 - Copernicus Educational Products Inc.
21
Actual Size:
M10 lock nut
2x
O
M6 lock washer
2x
N
Attach Projector Arm to Unit
Please refer to the installation guide included with your Epson projector for instructions on
how to install the projector on the adapter plate and on how to adjust the projector for use.
2-Person Task
Hook adapter plate over studs on
projector arm. Hold arm in position.
Rotate adapter plate into position and secure.
M6 x 19mm bolt
2x
I
O
I N
TIGHTEN
these nuts!
O
I N
WARNING
Maximum recommended weight
on bottom shelf - 50 lbs.
!
WARNING
Gas cylinders are under pressure.
To avoid property damage or bodily
injury, please use caution when
folding the arm.
!
U
U
M8 flat washer
2x
U
You will need:
(not to scale)
Epson Projector Arm with Adapter Plate x 1
34