Battery 100, Saved 18 viewing clear c = yes, All ima c = yes confirm? c = yes – Cuddeback EXCITE User Manual

Page 10

Advertising
background image

TURNING CUDDEBACK ON AND OFF

To disarm Cuddeback and prevent it from taking

pictures, slide the On/off switch to the OFF posi-

tion. The date and time will be maintained.

To turn Cuddeback on, slide the On/off switch to

the ON position (

figure 29

). If messages do not

appear on the LCD, replace the D Cell batteries.

When you slide the On/off switch to OFF, there

may be a delay before Cuddeback turns off.

Viewing the Battery Level

When you start Cuddeback, the display shows

the battery level of the 4 D Cell batteries. Battery

level reading is 100%, 75%, 50%, 25%, or 10%

(

figure 30

). When the batteries fail, the message

"Battery Failed" will be displayed.

STORING CUDDEBACK

If you intend to store your Cuddeback for more
than a month or two, we recommend that you
remove the batteries to eliminate any chance of
battery leakage.

Figure 29

19

TIP - Batteries fail sooner in cold temperature.
When temperatures are below 30 degree Fahrenheit,
you may want to replace the batteries when the
battery level is 25%.

Battery

100%

Figure 30

1) Attach a TV or camcorder to the TV

connector on Cuddeback.

2) Press

until [Images Saved] appears

(

figure 24

).

3) Press

or

. [Viewing] will appear on

the display (

figure 25

). An image will appear

on the TV.

4) View additional images by pressing

or

.

5) Press

when you are finished viewing images.

To Erase an Image that is being Viewed on the TV

1) View an image with the TV as described above.

2) Press

. The LCD will prompt [Clear Image

C = Yes] (

figure 26

).

3) To clear the image, press .

4) To continue without clearing the image,

press

.

To Erase All Images on the Card

1) Press

until [Images Saved] appears.

2) Press

. The LCD will prompt [Clear All

Images C = Yes] (

figure 27

).

3) To clear all images, press

. The LCD will

prompt [Confirm? C = Yes] (

figure 28

).

4) To clear all images press

. All images will

be cleared.

5) To continue without clearing the images,

press

, , or

.

Figure 24

Figure 27

18

Saved

18

Viewing

Clear

C = Yes

Figure 25

Figure 26

All Ima

C = Yes

Confirm?

C = Yes

Figure 28

Excite07OwnerManualReader.qxd 11/6/07 3:35 PM Page 10

Advertising