Cuddeback EXCITE - Manual (Page 6)

11
Figure 9
Enables/disables camera;
also used to view
information
Set key – sets date, time,
delays, etc.
Up key
Down key
General purpose key
What each key does!
used to change
settings, view
information }
STEP 3 - LEARN THE KEYPAD & DISPLAY
Cuddeback is programmed by using a 2 line
LCD display and 5 keys. (
Figure 9 ).
The KEY is used to enable or disable the
camera and to view information. The KEY
is used to set the date, time, delay and other
settings. The
KEY & KEY are used to
change settings or view information. KEY
is a general purpose key used for various tasks.
Moving from One Menu to the Next
Press
to change settings. Press again
to move to the next setting.
LEARN - To see how this works, press multiple times.
Press to view information. Press again
to move to the next display.
LEARN - To see how this works, press multiple times.
Figure 10
STEP 4 -
KEY IS FOR SETTING UP CUDDEBACK
is used to change Cuddeback's settings.
With each press of , a different setting will be
displayed ( Figure 10 ).
After you view or change the setting, press to
view the next parameter.
Delay
01 min
1) Camera Delay. After taking a picture, the camera will wait this amount of time
before arming itself for the next picture.
10
How to install batteries into your Cuddeback
1.
Unscrew
battery
thumb
screw.
2.
Pull metal
plate and
thumb
screw up
and out.
4.
Replace metal plate.
Push down to secure
firmly behind center
and bottom lips.
1. Unscrew battery thumb screw.
2. Pull metal plate up and out.
3. Remove batteries.
4. Replace metal plate.
5. Screw in thumb screw.
To remove batteries
Figure 6
3.
Insert
batteries.
5.
Screw battery
thumb screw
back in.
➤ Center
Lip
Battery
orientation
➤
Bottom Lip
Excite07OwnerManualReader.qxd 11/6/07 3:35 PM Page 6