Cuddeback EXCITE - Manual (Page 5)

STEP 2 - TURNING CUDDEBACK ON
1) Slide the On/off Switch to the OFF position
( figure 4 ).
2) Remove the Compact Flash card if it is
installed ( figure 5 ).
3) Install 4 brand new alkaline D cell batteries.
( figure 6 ). We recommend Rayovac or
Duracell brand batteries only!
4) Install the Compact Flash card.
5) Slide switch to ON. Do not press any key
at this time.
6) In a few seconds the battery level will be
displayed ( figure 7 ). In a few seconds the
date & time will be displayed ( figure 8 ).
Figure 4
Figure 5
9
TIP - Always remove the Compact Flash
Card when removing or installing batteries.
This will make it easier to remove the bat-
tery plate and prevent damage to the card. Figure 7
Figure 8
4/05/06
11:13
AM
Battery
100%
TIP - Don't be afraid to press the keys to
learn Cuddeback operation. You can not
damage your Cuddeback by pressing keys.
If you need to start over slide the power
switch to OFF, and then back to ON to
restart Cuddeback.
8
STEP 1 - FAMILIARIZE YOURSELF WITH CUDDEBACK
Take a moment to familiarize yourself with Cuddeback's parts.
Flash Lens
Camera window
Cover screw
receptacle
TV connection port
Fresnel Lens
LCD screen
Operation keys
Mounting hole for
wood screw (wing
nut/bolt included for
alternative mounting)
Flash Card
port
Figure 3
LED
Sensitivity adjustment
On/Off switch
USB port Figure 2
Battery plate screw
Excite07OwnerManualReader.qxd 11/6/07 3:35 PM Page 5