Cuddeback EXCITE User Manual
Page 7
STEP 5 -
KEY IS FOR
CONTROLLING CUDDEBACK
Press
to view information and to set the
operating mode.
1) View Date and Time (
figure 15
) - Press
until the date/time is displayed on the LCD
display.
2) View Images Saved - Press
again.
The LCD will display the number of images
saved on the Compact Flash card.
(
figure 16
).
3) Set the Camera Mode - Press
again.
One of Cuddeback's 3 camera modes
(Standby, Test, and Live) will be displayed
(
figure 17
). Press or
as needed to
change the camera mode.
a) Standby - Cuddeback will not trigger the
camera.
b) Test Mode - The red LED will illuminate
when activity is sensed but the camera will
not trigger.
c) Live Mode - Cuddeback will trigger the
camera when activity is sensed. The red
LED will NOT illuminate. About 45 seconds
after [Live Mode] is displayed, the
LCD will clear.
TIP - After Live Mode is displayed,
there is a 45 second delay before
the motion sensor starts. This
gives you time to install the cover
and move out of the area without
triggering the camera.
After setting up Cuddeback, install
the cover and leave the area. You
can leave the Camera Mode in
Standby or Test and Cuddeback
will automatically arm itself within
12 minutes.
Figure 15
Figure 16
Figure 17
13
TestMode
Images
19
4/05/06
11:13
AM
a) If [Camera Delay] is not displayed on the
LCD, press
numerous times until
[Camera Delay] is displayed (
figure 11
).
b) Press
or
to change the setting.
c) The range is 1 minute to 60 minutes.
2) Set Date (
figure 12
)
a) If [Set Date] is not displayed on the LCD,
press
numerous times until
[Set Date] is displayed.
b) Press
to advance the month.
c) Press
to advance the day.
3) Set Year (
figure 13
)
a) If [Set Year] is not displayed on the LCD,
press (S) numerous times until
[Set Year] is displayed.
b) Press
to reduce the year.
c) Press
to advance the year.
4) Set Time (
figure 14
)
a) If [Set Time] is not displayed on the LCD,
press numerous times until
[Set Time] is displayed.
b) Press
to advance the hour.
The AM/PM indicator will change to
indicate an AM or PM hour.
c) Press
to advance the minutes.
Figure 11
Figure 12
Figure 14
Figure 13
12
Set Year
2006
Set Time
11:16
AM
Set Date
4/05
Delay
01 min
Excite07OwnerManualReader.qxd 11/6/07 3:35 PM Page 7